Home | Sitemap
 

Anesthesia Dept.

FABIA 282 ANAESTHESIA MACHINE

SPECIFICATION

Two gases Rota meter Oxygen & Nitrous Oxide.Goldman Type Halothane Vaporizer. Built-in parking Space for Two of additional Vaporizers. Non return Cum Pressure Relief Valve.Emergency Flush Switch at Front Panel Connected toIncoming O2 Supply (Oxygen Switch Ensures Free Flow ofOxygen at 35-75 Ltr at 3.8 bar).Table Top Made of Stainless steel.2 Self Sealing Quick Coupling Type gas Outlet One  Each for O2, N2O at  The Back Side For Central pipe line connection. Drip Stand Locate at above Right Side of Trolley. Provision to Fit Ventilator.Provision to Accommodate Two Nos. 10 Ltr. Cylinders at   the Back Side. Fitted with Four Large Diameter Gauges Two Each for O2 & N2O. Two gauge to Show Pipeline Pressure O2 & N2O each. Pin Index Yokes Two for O2 & N2O. Change Over System for Open & Close Circuit. Preset Regulator for O2 & N2O Two Each. Four Spacious Swivel Type Drawers (Writing Surface is mounted beneath Table Top) Bains Circuit. Four Castor Trolley with Front Two Inter Lockable.

SAFETY FEATURES

N2O Automatic cutoff in case failure of oxygen supply. ·Low Pressure Oxygen Audible Alarm. ORC (Oxygen Rato Control) Oxygen concentration remains above 25% During the process, When Oxygen supply pressure is deficient, N2O Flow gradually Decreases till cutt-off.
NOTE: Cylinders,Circle Absorber, & other items than the above mentioned specifications are supplied at extra cost.

ME-15 ANAESTHESIA APPARATUS MAJOR

SPECIFICATION

Two Gases Rotameter Oxygen & Nitrous-Oxide Oxygen Flowmeter range 100 cc/min. to 10 litres/min., Nitrous Oxide Flowmeter range 200cc /min. to 12 litres/min. Standard Fresh Gas Outlet. Change Over System Open Circuit to Close Circuit. Emergency Flush Valve at front Panel connected to incoming O2 supply Goldman type Halothane Vaporizer. Parking space for two additional Vaporizers. Non-return cum Pressure Relief Valve minimize risk of back flow of gases. Blows off valve when pressure exceeds 200cm of water column fitted. Provision to fit Ventilator. Provision to fit Carbon Dioxide Absorber. Extended platform at rear for two 'B' type cylinder. Table top made of Stainless Steel. Top Tray provided at eye lavel for keeping Monitoring Equipments. Maggill's or Bains circuit. One spacious Drawer on smooth runner. Four Castor Trolley with front two lockable Wheels. Pin Index Yokes two for Oxygen and two for Nitrous Oxide. High-efficiency Regulators for reliability two each for O2 & N2O.

SAFETY FEATURES

N2O cut off in case failure of Oxygen supply. Low Pressure Oxygen Audible Alarm.
NOTE: Cylinders,Circle Absorber, & other items than the above mentioned specifications are supplied at extra cost.

 

ME-14 ANAESTHESIA APPARATUS MAJOR SPECIFICATION


1. Long rotating bobbin flowmeter (230 mm).

2. Plenum type ether Vaporizer.

3. Goldman type Halothene Vaporizer.

4. Non-return cum pressure relief valve.

5. 50 mm die Oxygen Guages.

6. 50 mm die Nitorious-oxide Guages.

7. Table top stainless steel.

8. Top tray for Monitoring Instruments.

9. Pin Indexed Yokes for Oxygen.

10. Pin Indexed Yokes for Nitorous-oxide.

11. Emergency Oxygen supply button.

12. Outlet.

13. Detachable capacious drawer.

14. Maggill's circuit.

15. Stainless/painted(Powered coated)frame.

16. N2O cut off system.

17. Preset Regulator for O2 & N2O.
18. Wheels with brake.

SAFETY FEATURES 
N2O cut off in case oxygen pressure falls below 10-15 Pnds..

ANESI-14 is available in Stainless Steel Frame,

ANSEI-14 SS & Painted (Powered Coated) Frame, ANESI-14P


ME-7 PORTABLE ANAESTHESIA APPARATUS

SAFETY FEATURES 
1.The apparatus fitted with Audible  Alarm.

2. Rotameter ensures protection against singular flow of Nitrous Oxide until a minimum flow of 1 liter Oxygen is released.

3. To eliminate the risk of wrong connection, the kit nozels are non Interchangable.

SPECIFICATION


1. Long rotating bobin flowmeter (230 mm).

2. Ether Vaporiser or Helothane Vaporiser Goldman type with glass bottle.

3. Emergency cum outlet.

4. The above head assemble on angle frame fitted on base box consisting mechanical alarm and nitrous oxide lock.

5. Bag mount.

6. Oxygen preset resulator (for bull nose cylinder).

7. Nitrous oxide preset regulator (for pin index cylinder).

8. High pressure Nylon ribbed tubing with non interchangeable end fitting.

9. Spare bodak seal washer & cork washer.

10. Cylinder ket 2 nos.

11. Rebreathing Bag (2 liter).

12.Corrugated tube antistatic.

13. Expiratory valve.

14. Angle mount.

15. Cathetor mount with tube.

16. Face mask adult.
OPTIONAL  [*ANESI-5 is also available without Safety Features.]

DIFFERENT TYPE ANESTHESIA VAPORIZERS: VAPORIZERS

Our Company Is  Fully Aware

That Today's Economic Environments Demand

The Highest Quality Within A Realistic Pricing Structure.

HALOTHANE, ISOFLURANE, ENFLURANE, SEVOFLURANE

SCREW FILLING OR KEYED FILLING  

CAGEMOUNT OR SELECTATEC ® FITTING.

F.A. VALVE: ME 811

F.A. Valve With Gauge Rota Meter For 'B' Type Cylinder.

ME 812

F.A. Valve With Gauge Rota Meter For Pin Type Cylinder.

ME 813

F.A. Valve With Gauge Rota Meter For 'B' Type Cylinder & Humidifier Bottle.

ME 814

F.A. Valve With Gauge Rota Meter & Humidifier Bottle With Hand Grip For 'B' Type Cylinder.

ME 816

Rota Meter With Control Value, Humidifier Bottle With L Adopter For Central Gas Papi Line.

ME 817

Preset Regulator With Rota Meter & Humidifier Bottle.

ME 818
Double Stage Double Guage Regulator